Yellow and Blue 0.96'' OLED Module (128x64 px)

Overview

The module with OLED display is useful in electronics projects where you have a lot of data to display, also offering low power consumption. The space available for display is quite large, with 128 x 64 points. When the display is fully charged, it consumes only 0.1 W. It also has a diagonal of 0.94 inches and a viewing angle of more than 160°.

Such a display is suitable for applications where you want to display user data. Also, the size and low consumption make it ideal for the display of a smartwatch. The display is based on the SSD1306 integrated circuit. By reattaching the resistors on the back of the board, you can select the desired communication according to the drawing. The screen is compatible with a wide range of microcontrollers and development boards, such as Arduino.

Specifications

• Supply voltage: 3 V - 5 V
• Maximum current consumption: 22.75 mA
• Viewing angle: >160°
• Resolution: 128 x 64 pixels
• Diagonal: 0.96 inches
• Driver chip: SSD1306
• SPI or I2C communication
• Dimensions: 27.3 x 27.8 x 3.7 mm

Features

• No backlight, self-illuminating display unit
• Supports many control chips: fully compatible with Arduino, 51 series , MSP430 series, STM32/, CSR chips, etc.
• Low power consumption: 0.08W when the full screen is lit, and 0.06W for normal full-screen display (far lower than TFT, LCD and other technologies)
• Wide voltage support: directly supports 3V without any modification ～5V DC
• Working temperature: - 40℃ ~ 70℃
• Less IO port occupation: using SPI or IIC communication mode, Only 4 IO ports can be driven at most
• No font library: Use modulo software to fetch characters, display what to choose

SPI Interface

1. GND (power supply negative)

2. VCC (power supply positive)

3. D0 ( SCL clock line)

4. D1 ( SDA data line)

5. RES (reset line)

6. DC (data / command)

7. CS (chip select) must be grounded when not in use

Don't delay. Buy today.

Add to cart now!