RGB LED Common Cathode

Good price and found no duds!

This is the second batch of these I’ve bought and they work great for making Ebike tail lights. I run about 25 of these in series with one of the included resistors at each end of the string for a48v battery.

Great RGB

Used 100-ohm resistors with VCC of 3.3V and they were very bright. LEDs diffuse works very nicely.

Quality product

These were perfect for my projects!

Nice, bright, even with only 5 milliamps

These worked very well for my low power project which needed LEDs that are nice and bright under small current conditions

Great for hobby electronics

I've used these in a variety of projects and love them. Mostly, I'm connecting them to Arduinos and running them with 5V power + resistor. It's hard to find the version with a common cathode.

Really cool LEDs

Really love the brightness these LEDs have. This item is for the common cathode one. Didn't know the difference between common cathode vs common anode so I had to read about them. I'm a beginner so I still don't know that much about the specifics but it was really easy to set up for my project. I also bought the common anode LEDs and for my needs I like to use them. Also read up that the common anode are overall the preferred ones to use. Bought my other LEDs from Plusivo and I love them. All LEDs that I received worked perfectly.

Excellent lights

A little bit of wiring and soldering and I got myself an rgb mouseat. excellent product, thanks.

Good LEDS, good price

These LEDs have great colors and brightness. Easy to use, pretty good tolerance. All of mine worked exceptionally well and each color works. I am using these with an Arduino board. I tested them all with a color mixer sketch (of my own).

Good quality

As always, super high quality product.

So far so good

I've only used one so far but it has worked perfectly for my needs. I created a cable out of an old Ethernet cable and a 10 pin connector and wired the led so I could connect it to a serial port on a motherboard in a Windows PC. The LED itself is a perfect replacement for the power led in the computer case. I'm using Windows 7 with Windows Media Center and when I have a recording in progress, this led turns red. I'm also able to program it to turn other colors for different reasons. Using software called LEDsDriver by Slick Solutions and EventGhost for different events.