5 V - 12 V ZVS Induction Heating Module

Works great, thanks

Used this to build an induction heater. Works great and was easy to hook up.

Nice induction heater works great

Soldering it to board looks cleaner and gives much better connection than using the screws soldered into board.

Cool little gadget makes metal glow in seconds!

If you need to heat up a small tool to the point where it glows red, this is the thing for you! It can easily heat a small nail to red hot in about 20 seconds. You do need to solder the coil to the board, but that’s it for setup. I ran it off of my bench power supply. It draws around 1 amp when nothing is in the coil, but this increases based on the size of what is inserted. Just don’t give it more than 12 volts, which is the regulated voltage, or you’ll break it. Also, it is important to know that this will only heat ferrous metals. The more iron in the metal the better.

Great Induction Coil and Module

Great size, works wonderfully. LEDs are quite bright but the enclosure remains manageable. Heat up time is super quick.

Good for a little red hot project fun!

I swapped this one into my project and it worked great! Heated a small screwdriver red hot in about 5 seconds.

Good unit for the price

Virtually identical to my other unit that goes for more. Quality and function are the same.

Quality product

It is very solid and looks professionally made. I recommend this product.

So amazing!

This product is super awesome. I just hooked it up to an old computer power supply I had, the yellow wire to the positive and the black to the negative and jumped the green wire to ground. Make sure you solder the coil to the PCB board and don't rely on the plastic connectors! This unit heated up my hobby knife blade red hot in about 3 seconds!

Five stars

Arrived in working order. Seems to work as expected. Pulled 1.5 amps at 12v.

Works excellent. I'm so surprised for the price.

Even though this is a little kit I use it for getting unstuck bolts and nuts on Rusty vehicles it's amazing how this technology works because I can get a bolt hotter than I could with other brand products and then it allows it to easily be removed.

Super cool

This was cool. Held a soft iron rod in there and got really hot. Put the rod in the pool and started sizzling pretty good. I’m sure if I held it longer it would get even hotter. Super cool. I used a 11.1v lipo battery. Just put the cords right in it

Amazed with this product

Works great as a dynavap induction heater. I decided not to mount mine in a box and have 6 coils on one side and 4 on the other. 6 coil side is for first heat up - about 6 seconds - and 4 coils for follow up heating. I could use the 6 coil side entirely, but I have to be quick about removal or I'll combust. The 4 coil side has a 12s heat up on first go and 6s follow up but combustion is less likely.