Servo Motor Tester

Overview

This is a servo motor tester with 3 modes. It can simultaneously connect up to 3 servers. It can also connect up to 3 ESC test and compare the response time.

Specifications

• Output current: ≤ 15 mA
• Supply Voltage: 4.2 V to 6 V
• Output signal: 1.5ms ± 0.5ms
• Dimensions: 46 x 32 x 17 mm
• Weight: 8 g
• Adjustment mode: manual, automatic, neutral

Features

This product can easily detect and set the virtual position, jitter and neutral position of the server. Two sets of servos or electronic speed governors can be connected, single chip control, stable. Good performance and high precision. Rotate the knob to detect the steering gear. If you connect an electronic speed controller (with or without a brush), you can get rid of the remote control device and perform manual speed adjustment. It is very practical to test the performance of the speed controller or motor, and there is no need to connect the remote control and the receiver tediously. It is equivalent to a "manual receiver" function, which simulates the rudder of the transmitter through the knob.

3 Ways to test the actuators or ESC sites

1. Manual mode: turn the engine at different speeds and check the reaction time.

2. Neutral mode: make the servo move back and forth to a neutral point.

3. Automatic mode: make the servo move like a car wiper at the widest angle.

Don't delay. Buy today.

Add to cart now!