12 V Relay with Timer and Display

Overview

This module has advanced timing chip control and precise timing performance commonly used in car modification, motor control, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves and other equipment.

A simple analogy: power on the bulb, the bulb will light up immediately, through this product, after the bulb is energized, the bulb will turn on after a period of delay, and keep it until the power is off.

Specifications

• Output Voltage: 5 V to 30 V
• Operating Current: 50 mA
• Operating Voltage: 12 V
• Operating temperature: -40 ° C to 85 ° C
• Size: 65 mm x 36 mm x 18 mm

Features

• The output adopts optocoupler isolation, enhances the anti-interference ability, power consumption, and ensures stability. Industrial-grade circuit boards, PLC-like, set parameters can be remembered forever after power failure.

• There are three time ranges, users can short press K2 to choose, 0-99.9 seconds, 0-999 seconds, 0-999 minutes. Press K1 to adjust the hundreds and tens of digits, and K2 to adjust the numbers from 0-9. Long press K2 to turn on or off the glow tube to reduce power consumption.

A simple Setting Time Method

After the power is turned on, the countdown time is up and the relay works.

Press the K1 hundred-digit glow tube to start blinking, press K2 at this time , the hundred-digit number changes; press the K1 ten-digit glow tube to start blinking, press K2 at this time , the ten-digit number changes; press K1 single-digit digital tube flashing, then press K2 , digit changes; then click K2 , ; glow tube stops flashing, then press K2 , decimal point shift bits represent the decimal point in the 0 to 999 minutes shows ten 0 to 99.9 seconds without a decimal point means 0 to 999 seconds; after selection, the time is set at this point. Long press K2 to turn on or off the glow tube to reduce power consumption.

Don't delay, buy today.

Add to cart now!