Module with 2 Solid State Relays (240 V, 2 A)

Overview

This product is a module with 2 solid state relays useful for medium power AC applications. Relays resist to 240 V, alternating current at a frequency of 50 Hz - 60 Hz. The maximum current of each channel is 2 A.

State solid state relays have much smaller dimensions than normal ones with coil control. Their names are related to how they work, that they have no moving parts.

Specifications

• Operating voltage: up to 240 V AC (50 - 60 Hz);
• Current: up to 2 A;
• Control voltage: 5 V;
• Current consumed: 160 mA;
• Safety with 2 A resistance;
• 2 independent channels.

Instructions for Use

1. Connect the consumers to the mode.

It is advisable that a single consumer is connected to each channel in order not to request it.

2. Power up the module with a voltage of 5 V.

The module is powered by pins marked DC+ and DC-.

WARNING! Observe the polarity, otherwise you may damage the module.

3. Connect the module to a development board.

Control pins are marked with CH1 and CH2. If you have a consumer that consumes enough current, only a pulse with the logic voltage 1 is required to switch the relay on / off. If the consumer consumes too little current, the relay will not turn on and the logic voltage 1 should be maintained on the relay pin.

Don't delay. Buy today.

Add to cart now!