Tilt Sensor

Really work great.

I'm surprised at the current they can carry given their tiny size work great.

No issues with these switches.

The ball bearing actuates the sensor anytime the sensor is within about 80 degrees of upright. The switch can also be used to detect shake quite well.

Work fine

Works as advertised. I used them for a project of mine. Low voltage low current. These are tiny. Just what I needed.

Five Stars

Resilient, functional, inexpensive

Works well for low voltage DC circuit

I'm using one attached to a vertical opening driveway gate to connect 3.7 volt lithium batteries to an LED light only when the gate is open. The load might be 2 amps. The circuit closes reliably at the same spot in the arc of the gate. The first one I used worked immediately just as expected. The leads are a thicker, stiff metal and you can just bend them to suit your situation. Nice product to work with.

Well Built and as advertised

Quick response to motion. Very sensitive. Good value

Simple, predictable and cost-effective switches

These gravity switches work great. The leads are strong and hold their position. The housing was easily held in position with hot glue. I used these in mason jar lights that were turned on and off by inverting. Slick. These worked well.

Quality product

I purchased these switches to use in a couple of home projects for the car and around the house. The switches were delivered on time and well packaged, so far both applications I purchased have worked well. One is triggering some lights when the lift of my car is up, the other is performing the same type of function in my travel trailer. So far all the switches have worked, and none malfunctioning.

Good and affordable

Used in my Raspberry Pi project for a tamper sensor and works great. Super affordable and does what I expected.

Very small, easy to hide

Small, easy to hide and work well. Small size allows the ball to contact if not set steep enough in the off position, so expect to have to find it's "happy spot". Worked great for trunk lights, grounding the light, attached to the hinge.